Eagletac D3C Clicky Ti – 800 Lumens


The Eagletac D3C Clicky Titanium Flashlight is ultra compact yet super bright, capable of producing 800 Lumens and 128 metres of throw using a CR123A Li-ion battery or a 16340 rechargeable battery.

The Eagletac D3C Clicky Titanium is less than 8cm long and weighs 40g, making it an ideal everyday carry flashlight to keep in your pocket or backpack. Choose from 5 brightness levels and 4 hidden auxiliary modes for any outdoor, tactical and emergency application.

In stock

Same day dispatch
Limited Lifetime Warranty
30 day returns
Free gift when cart over $250
Klarus Mi2 USB Keychain Light-0
SKU: D3C Ti Categories: , , , ,


PREMIUM TITANIUM BODY – The D3C Clicky Titanium is constructed with the finest craftsmanship, exhibiting a premium Titanium body for durability and quality.

LED Lumen: 800*~410 / 155 / 55-35-21 / 16-2-0.5
ANSI Lumen: 
560*~310 / 120 / 40-26-17 / 13-2-0.5
Center LUX: 4,100

Runtimes: 0.6-1 – 300 hours 

Length: 2.9 inch (7.5 cm)
Body Diameter: 0.78 inch (2 cm)
Head Diameter: 0.78 inch (2 cm)
Body Weight (excluding batteries): 1.4 ounce (40 grams)

*At maximum output level (100%), the active thermal management feature slowly reduce the maximum output level according to the flashlight internal temperature to 50% once flashlight reaches 140°F (60 °C) (higher surrounding temperature may result in higher flashlight temperature). It’s normal for high power flashlight to run hot at MAX level. Reduce the output if the user finds the flashlight too warm to hold.

*Output is same regardless of battery type used. Active cooling (blowing cool air toward the light) or passive cooling (holding the light in your hand) helps preventing excessive heat built at the LED. Turn off the light to allow it to cool down if you find the flashlight too hot to hold. Do not leave the light running unintended with li-ion.  

What’s included:

  • Spare o-rings
  • User Manual
  • Rigid Nylon Holster w/ self-retention device and flip
  • Mil-Spec Paracord Lanyard w/ quick attachment clip


Basic – Press on the switch button until it clicks to turn on the flashlight. Press the switch again until it clicks to switch off the light.
Access output groups 1 & 2 – Tighten the head to access group 2 output. Loosen the head to access group 1 output.
Group 1: MAX – Strobe (Variable) – cycle
Group 2: Very low – low – med – high – Very low – low – med – high – Strobe(Constant)- Flash(Hi)- S.O.S.(Fast) – Beacon – Flash(Low) – cycle
Switch between output level – With the flashlight on, slightly press the switch and release (within 1s) to switch to the next output.
Switch between output level – With the flashlight on, slightly press the switch and release (within 1s) to switch to the next output.




Additional information

Weight 0.02 kg


There are no reviews yet.

Be the first to review “Eagletac D3C Clicky Ti – 800 Lumens”

Your email address will not be published. Required fields are marked *