Eagletac TX3G Pro MKII Rechargeable Flashlight 3550Lumens

Dimensions

Head Dia.

1.3 inches (33 mm)

Body Dia.

1.2 inches (31 mm)

Length:

5.4 inches (138 mm)

Weight

6.9 ounces (195 grams)

Battery Type

• 1 x 26650 (protected and button-top)
• Compatible battery size (diameter/length)
  
  • 26-26.8mm/65-68.5mm

Operating voltage

• 2.7V - 4.2V

What's included

• TX3G Pro MKII flashlight
  
  • Crenulated Stainless steel bezel
  • L1900 Type-C charging circuit
  • Rigid nylon holster w/ self-retention device
  • Add-on diffuser filter with flip-cover feature
  • (US only) UL certified 5V 2A USB charger
  • (EU only) TUV/GS/CE certified 5V 2A USB charger
• 3.7V 5500mAh 26650 rechargeable protected li-ion battery (15A discharge)
• Spare o-rings
• User Manual
• Mil-Spec Para-cord Lanyard w/ quick attachment clip
• Flat tail-stand tailcap
• Type-C USB charging cable (3.3feet/1meter) w/ AWG24 copper wire

Max output

• CREE XHP70.2 P2 Cool White LED
  
  • LED lumen: 3550

• • • A blue LED indicator under the main switch reports the estimated battery remaining capacity
      
      • Flash once: lower than 10%
      • Flash twice: 30%-50%
      • Flash 3x times: 50%-70%
      • Flash 4x times: higher than 70%

Charging level report (charging)

• • A blue LED indicator under the main switch reports current charging level
    
    • Flash once: lower than 50%
    • Flash twice: 50%-75%
    • Flash 3 times: >75%
    • Constant on: 100% (done)

Runtime

Up to 200 hours

Operations

Basic operations:

• Turn on the light at MAX output by pressing the BLACK button switch.
• Turn on the light at LOWEST (programmable) output by pressing the WHITE button switch
• To turn off the light anytime, press and release the BLACK button switch.

Advanced:

• To program the LOWEST startup output, switch to the desired output level and continuously pressing and holding the button for three seconds until the side LED turns on.
• (Flashlight w/ programmable feature) In rare occasion user may experience the absence of lowest output level from a brand new purchase. If this is case, set the programmable startup level once will initialise the memory setting and will take care of this issue once and for all.
• For MAX output momentary on, press and hold the BLACK button switch for immediate output.
• To switch between different brightness levels, press and release the WHITE button switch when the flashligh is on.
• To enter hidden auxiliary levels, cycle through at least two cycle of regular output.
• For instant MAX output - at any output level, press and hold the BLACK button switch. Release the button to return to previous level.
• For instant Strobe output - at any output level (even) off), double press and hold the BLACK button switch. Release the button to return to previous level (or off).

Charging:

• Remove the waterproof silicon cap and insert the charging power plug to charge.
• Blue side LED indicates the battery is being charged. It reports charging percentage by blinking.